Bug Out Camper

The Bruder EXP-6 is the go anywhere, do anything, expedition trailer that you most definitely need in your life. If the world is falling apart as fast as the mainstream media says it is, you’d be wise to have one of these extremely rugged units stocked with necessities and hooked up to an equally rugged SUV.

Or you could just pick one up and use it for leisurely weekend getaways. Either way, the EXP-6 is an attractive piece of hardware.

Designed, built, and tested in Australia—the country that’s always trying to kill you—the Bruder EXP-6 is a completely over-built adventure mobile accessory. A four corner independent air suspension allows the trailer to go where others simply cannot by offering superior ground clearance and over 300 mm of suspension travel. It’s capable of supporting up to 11 times its weight of 3,703 lbs, so as long as you’re keeping your payload under 40,733 lbs, you’re good to go.

On top of the capability to make it to remote destinations, the EXP-6 can also keep you in the lap of luxury while you’re there. Between the queen size bed, flat screen TV, A/C unit, shower, modular vanity and toilet, any environment will instantly be more hospitable thanks to this trailer.

In fact, if rent gets any higher here in Los Angeles, it’d be worth looking into living in one of these, might even be an upgrade. My apartment doesn’t have a diesel powered ceramic cooktop or Nespresso coffee machine, does yours?

Having been sealed airtight so no dust, dirt, mud, or toxic chemicals can get inside, and sporting the electronically adjustable air suspension makes the Bruder EXP-6 pretty cool. The narrow body construction that allows it to fit down tight off-road trails and fact that it can ford shallow rivers makes it cooler. But it’s the outdoor kitchen makes it the coolest.

Being able to roll up literally anywhere your vehicle can take you and get to work cooking is the feature that seals the deal for me. Imagine parking on a mountainside or secluded beach, popping open the awning and getting to work in your outdoor kitchen preparing a meal. Once you’ve had your fill, you can un-hitch the EXP-6 and take to the trails for further exploration in whatever 4×4 you piloted up there.

A Defender like the one pictured would be nice, so would a Toyota Land Cruiser, but the ultimate rig to tow one of these with has to be a Mercedes-Benz G500 4×4². Give me a Bruder EXP-6 behind one of those highlighter yellow monsters and I’m gone.

Field Reload Kit With Brass Shotgun Ammo

"Urban Man: Here is another great video from a friend of mine."

Warning: For educational purposes only. Use these techniques at your own risk.

Tools/Equipment:

1. Brass shot shells (size for weapon system being used, 12 gauge, etc.)
2. Shot
3. Pyrodex Rifle and shotgun powder (or preferred brand)
4. 209 shotgun primers
5. Large pistol primers
6. Wadding material
7. Over shot card material
8. Lighter and glue stick
9. Primer crimp tool or "C" clamp setup with deep well socket
10. Primer removal tool
11. Powder tamper tool
12. Powder and shot measuring tool
13. Container for brass shells
14. Container to store kit
15. 15/64 inch drill bit
16. 23/64 inch drill bit
17. Wad and over shot cutter tool
18. Drill
19. Flat piece metal stock
20. Rubber hammer or similar 
21. Flat piece of wood stock

Converting brass shell to accept the 209 primer:

1. First use the 15/64 drill bit and drill out the primer hole.
2. Using a 23/64 drill bit, drill a slight recess in the primer hole deep enough to allow the primer rim to seat flush with the bottom of the shell. See photo above.
3. Seat the 209 primer like you would a regular 12 gauge shell when reloading.

Note: Shotgun firing these types of reloads need to be cleaned more often than factory loaded ammo.

Reload 209 Shotgun Primers Using Field Expedient Methods

Warning: For educational purposes only. Use these techniques at your own risk.

Tools used for field expedient reloading

Items needed to reload 209 primer

Removing 209 primer components

209 primer assembly

"Urban Man" My survival buddy sent me another post in a series of reloading shotgun ammo. This video shows how to reload the primer as well when you have no primer replacements."


Suggested tools used:

1. Antique hand primer crimp tool
2. Wood dowel for powder, wad and shot compressing
3. Primer removal tool with socket base (5/8 inch socket)
4. Rubber hammer
5. Wad cutter tool (for what ever size shell you are loading)
6. Flat punch that fits inside primer cup to flatten out dimple
7. Flat piece of metal stock
8. Flat piece of wood
9. Strike anywhere matches
10. Powder and shot measuring cups
11. Wad material (paper, plastic, wool, etc)
12. Over shot card material (cardboard, playing cards, etc)
13. 5.5 mm socket (used to remove primer cup)
14. Pin or finishing nail used to pound out primer cup.
15. Lighter or similar flame source
16. Glue stick
17. Rifle and shotgun powder with container (I used Pyrodex RS)
18. Bird shot with container (I used #7 1/2 in the video) 


Note: Do not allow the ammo to get wet. Do not jar the ammo around by throwing into an ammo can or something of that nature. Protect the ammo until it is needed. It is best to shoot this ammo from a single shot or double barrel shotgun rather than a pump action. A pump action can be used if you load and fire one round at a time rather than using the pump action.

One drawback from reloading spent primers is the chance that the match head powder or what ever other ignition source was used may not ignite and you get a dude fire.

In the event the primer does not ignite, wait about 60 seconds with the end of the barrel pointed on target in the event there is a cook off. A cook off is when the powder could be smoldering but has not yet ignited. If it ignites and the end of the barrel is pointed toward someone, there may be a chance of an accidental shooting.

Always inspect the shells for damage and cracks. Do not reuse or shoot damaged ammo. Use safety glasses when loading your ammo and keep open flames away from your powder. 

Fielding Expedient Ammo Reloading

"Urban Man~ Here is an interesting lesson from a survival buddy of mine."

Caution: This lesson is for educational purposes only. Gun powder is dangerous. Firing damaged or incorrectly loaded ammo is dangerous as well.

There may be a time in ones life when it may become necessary to have to reload ammo in the field, especially in a wilderness survival situation or the collapse of society. 

We are comfortable in knowing that at the moment we have access to ready made store bought ammo. But, what if that luxury was some how taken away? What if there were no stores left or available to purchase our ammo?

In such as situation, ammo can still be available if one knew how to obtain what was needed to reload their own. Spent ammo shells, especially shotgun shells can be found laying around all over the desert. Primers can be reconditioned and reloaded. Black powder can be homemade. Lead shot can be made from scrape lead.

You really do not need fancy reloading equipment in order to reload ammo in an emergency or self reliant situation.

Learn now to start saving your spent ammo hulls and shells. Set them aside to be reloaded at a later date when the time is needed.

Here are the steps that were covered in the video to reload a 12 gauge shell: (if this is the first time a plastic shotgun shell is being used, cut the top crimp fingers off the shell where the crimp line meets the star crimp.)

1. Remove primer
2. Install a new primer
3. Measure powder and add to shell
4. Using dowel rod, gently compress the powder in the shell
5. Add correct amount of wading (plastic, paper, animal hair, leather, etc.)
6. Using dowel rod again, gently compress the wad into the shell
7. Add correct amount of shot. (insure that there is enough room at the opening of the shell to add the over-shot card)
8. Add over-shot card and compress gently with dowel rod
9. Add glue over top of shot card ensuring that the inside walls of the shell receive glue as well
10. Immediately add another shot card over the top of the first one and apply gentle pressure to allow glue to spread out

Note: Do not allow the ammo to get wet. Do not jar the ammo around by throwing into an ammo can or something of that nature. Protect the ammo until it is needed. It is best to shoot this ammo from a single shot or double barrel shotgun rather than a pump action. A pump action can be used if you load and fire one round at a time rather than using the pump action.

Always inspect the shells for damage and cracks. Do not reuse or shoot damaged ammo. Use safety glasses when loading your ammo and keep open flames away from your powder.